無塵車間圍護結構的清潔
- 發布人:
- 發布日期:2017-04-13 17:37:57
首先是潔凈室的墻面、地面、頂棚等圍護結構,在設計、施工中要選用表面光潔,質地堅實、不產塵、少積塵、耐清洗等符合質量要求的材料。要求它們在頻繁地擦拭、洗滌等清潔、消毒的條件下,表面不變粗糙或多孔,否則會存留微粒和化學污染物,或容易導致微生物污染。
First is the clean room walls, floor, roof and enclosure structure. In the design, construction to select the surface smooth, solid texture, does not produce the dust, less dust, washing resistance, etc. to meet the quality requirements of the material. Require them to wipe, wash, and so on frequently, the condition of disinfection, the surface is not constant rough or porous, otherwise it will remain particulate and chemical pollutants, or easily lead to microbial contamination.
在設計、施工中應保證無塵車間內的墻面、地面、頂棚、門、空氣擴散板和地漏等都是易于進行表面清潔的。而且還應把墻面、地面、頂棚等的接縫處的細節考慮在內,特別要避免出現有可能積留水分的地方或表面。
Shall ensure dust-free workshop within the walls, floor, ceiling, doors, air diffusion board and floor drain is easy to clean surface in design and construction. But also take into account the details of the juncture of the walls, floor, ceiling, and especially to avoid possible retention of water or surface.
傳送設備的表面易于清潔也十分重要。物料、零部件等的傳送帶往往是難于清潔的部位,在工藝設計時必須予以關注。
The surface of the transmission equipment is easy to clean and very important. The conveyor belt, such as material and component, is often difficult to clean.
在輪車、推車和攜帶材料的人員頻繁通行、極易碰到的墻和門等的外露表面處,應有耐磨損、耐的防磨條或防護杠,以保護易受損的材料,如醫院手術室潔凈走廊的防撞帶就是應用的實例。
In the wheel, carts and carrying material personnel frequently encountered, very easy to meet the wall and door exposed surface, should wear resistance, resistance to abrasion or protection, to protect vulnerable materials, such as hospital operation room clean corridor of the collision belt is an example of application.
在設計和施工等方面負荷要求的基礎上,嚴格的清潔制度是保證盡可能減少圍護結構散發污染的重要方面。
On the basis of the design and construction, the strict cleaning system is an important aspect to ensure the protection of the building envelope.
- 上一篇:凈化鋁材配件-膠盒有油的清洗流程
- 下一篇:空氣凈化工程相關靜電測試方法